Hydraulic kit - Volvo EC160E MG - Double E Hobby

Hydraulic Kit for Volvo EC160E Excavator by Double E Hobby

This kit includes the hydraulic components for Double E Hobby's electric Volvo EC160E conversion.

We recommend using Magom HRC hydraulic oil.

It includes:

• 1 x brushless pump with integrated tank with silent blocks and two bushings. Integrated adjustable fittings. 2 M4x4 button head screws. Motor NOT included.
• 1 x special 3-way valve. Integrated adjustable fittings. 1 x M3x5 button head screw + washer. 4 or 5 way if selected.
• 3 mm diameter hose (4 meters for flexible hose and 3 meters for rigid hose).
• Hydraulic oil (250 ml). Locking sleeve for 3mm hose (22 units for flexible hose and 28 units for rigid hose).
• 1 x Spring for 3mm pipe.
• 4 x cylinders - 15 mm diameter:

             - 2 x cylinders for main arm
             - 1 x cylinder for middle arm
             - 1 x cylinder for bucket

• Holds 3mm hoses (4 for flexible hose and 5 for rigid hose).
• Plate for pump and valve support.
• 3 x M3x30 cylinder fastening pins
• 22 x standard locking sleeve.
• 6 x special caps for holding the cylinders

  Paint option includes:

• For flexible hose: the painting of the cylinders, support plate and pipe clamps.

• For rigid hose: the painting of the cylioders, support plate, clamps pipes and rigid pipes.

  If you want to paint it yourself (in the event that you include rigid pipe) we recommend applying a little heat to the connections to prevent the pipe from breaking. We apply screw fasteners in all the connections, in this way it is softened and easier to manipulate.

REQUIRED (see our recommendations below):

• Micro-servos, one for each valve port
• 1 x 30A brushless ESC.
• 1 x brushless motor for the pump
• 3 x brushed ESCs - we recommend BS18 or CTI Thor 15HF
• 1x connection board (recommended)