SERVONAUT M24 speed controller + lighting system

Speed controller with lighting system

Further development of the M20 + with 4A S-BEC and deactivatable cruise control improved lighting system with xenon and incandescent effects, multibus compatible equally suitable for conventional engines and bell anchors.

SPECS:

• Output power: 20A / 5min

• Clock frequency: 16 kHz or 32kHz.

• Supply voltage: 7.2 or 12 V NiMH, 2s or 3s Lipo.

• Receiver Supply (S-BEC): 5.3V and 4A.

• Protective functions: overload, temperature, undervoltage.

• 6 switching functions: Stands / driving lights, 2x turn signals, brake lights, reversing lights.

• Switching capacity: 700 mA, switching voltage is equal to the supply voltage.

• Control outputs for a servo (fifth wheel) and a Servonaut sound module.

• CARD interface for the following settings: Cruise control on / off, combined mode, incandescent effect, xenon effect, turn signal in reverse, starting aid, acceleration, braking effect, 32kHz for bell armature motor, parking light brightness, turn signal brightness.

• Module comes with default setting (cruise control) - different settings require a Servonaut CARD or HS12.

• Requires 2 receiver channels.

• Dimensions: 80 x 43 x 13 mm.